Tumble Creek
Tumble Creek Trail is a 12.2 miles trail in Pike and San Isabel National Forests, Colorado. The Forest Service rates it trail class 2 to 3 to 5, moderately developed to fully developed. It is open to hiking, horse and pack stock and mountain biking. It enters Buffalo Peaks Wilderness.
Trail conditions, closures and hazards are not tracked here. The Pike and San Isabel National Forests official page carries current alerts and closure orders.
Map
One end Other endLine simplified to about 100 metres. Basemap from the USGS National Map.
| One end | 39.0679, -106.1168 · Directions ↗ |
| Other end | 38.9495, -106.1429 · Directions ↗ |
The ends are the two ends of the longest connected chain of segments. The record does not say which is the usual start. The trail is recorded as 9 segments.
The trail
| Length | 12.2 miles |
| Trail class | 2, moderately developed; 3, developed; 5, fully developed |
| Type | land trail |
| Surface | native material |
| Typical grade | 12-20 percent |
| Typical tread width | 18-24 inches |
| Motor vehicles | Closed to all motorized use year-round |
| Accessibility | Not evaluated |
| Trail numbers | 617 |
| Forest | Pike and San Isabel National Forests (unit 0212) |
| States | Colorado |
| Detail published | management level, with uses |
Values are the set across all segments. Class 1 is minimally developed and class 5 is fully developed. Grade and width are the forest's typical values, not measured extremes.
Allowed uses
| Hiking | Allowed year-round |
| Horse and pack stock | Allowed year-round |
| Mountain biking | Allowed year-round |
A use is listed when the Forest Service records it as managed, accepted or discouraged on any segment. Discouraged still means legal. Uses marked restricted are left out. Where the forest publishes a Motor Vehicle Use Map, that map governs motorized use.
Wilderness
- Buffalo Peaks Wilderness WildernessFS · about 69% of the line is insideWilderness Connect ↗
Inside a designated wilderness, bicycles and motor vehicles are prohibited by law regardless of the trail record, and permits or group limits may apply.
Trailheads
No season published Wilderness regulations apply within Buffalo Peaks Wilderness . | 0 mi |
Distance is from the point to the nearest part of the trail line. Season text is what the forest wrote and is often a season name rather than a date. The recreation page link goes to the Forest Service site, which may redirect to the forest's recreation index.
Camping nearby
Campsite Atlas cards carry site counts and booking links from Recreation.gov. Forest Service cards come from the recreation layer and link the agency page.
Fire nearby
- WildfireWillow
21 mi from the trail midpoint · 7,389 acres · 80% contained
Distance is to the reported incident point, not the fire edge. Closure orders are on the forest's official page.
Explore
Reference
Questions people ask
How long is the Tumble Creek Trail?
12.2 miles, the sum of the 9 segments the Forest Service records under this name in Pike and San Isabel National Forests.
Source: Forest Service trail layer
What is allowed on the Tumble Creek Trail?
hiking, horse and pack stock and mountain biking. The trail is closed to motor vehicles year-round.
Source: Forest Service trail layer
Where does the Tumble Creek Trail start?
The line begins at 39.0679, -106.1168 and ends at 38.9495, -106.1429. The nearest recorded trailhead is Four Mile Trailhead, 0 miles from the line. The record does not say which end is the usual start.
Source: Forest Service trail layer
Is the Tumble Creek Trail in a wilderness area?
Yes. It enters Buffalo Peaks Wilderness. Wilderness rules ban bicycles and motor vehicles and often limit group size.
Where can I camp near the Tumble Creek Trail?
Weston Pass (1.1 mi) is within five miles of the trail. Site counts and booking links are on Campsite Atlas.
Source: Campsite Atlas
How developed is the Tumble Creek Trail?
Trail class 2 to 3 to 5, which the Forest Service describes as moderately developed to fully developed. Class 1 is a minimal, unimproved route and class 5 is fully developed, often paved.
Source: Forest Service trail layer
How steep and how wide is the Tumble Creek Trail?
The typical grade is 12-20 percent. The typical tread is 18-24 inches wide.
Source: Forest Service trail layer
Who manages the Tumble Creek Trail?
Pike and San Isabel National Forests, Forest Service unit 0212. The trail is in Colorado.
Is there a fire near the Tumble Creek Trail?
1 active incident within 50 miles of the trail midpoint as of 2026-09-17, the nearest Willow at 21 miles. Check the forest's closure orders before you go.
Source: Fire nearby
Source
This page is built from 9 segments named TUMBLE CREEK in the Forest Service TrailNFS_Publish layer, administrative unit 0212. Wilderness overlap is tested against the National Wilderness Preservation System layer from Wilderness Connect. Trailheads and Forest Service campgrounds come from the Forest Service Recreation Opportunities layer. Data refreshed September 17, 2026. The methodology page explains how segments become trails.