National Forests in North Carolina · North Carolina · Trail TR440-G

Mst - Grandfather RD

Mst - Grandfather RD Trail is a 70.9 miles trail in National Forests in North Carolina, North Carolina. The Forest Service rates it trail class 3, developed. It is open to hiking, horse and pack stock and mountain biking. It enters Linville Gorge Wilderness.

Trail conditions, closures and hazards are not tracked here. The National Forests in North Carolina official page carries current alerts and closure orders.

Map

One end Other endLine simplified to about 100 metres. Basemap from the USGS National Map.

One end35.7722, -82.1669 · Directions ↗
Other end36.0810, -81.8298 · Directions ↗

The ends are the two ends of the longest connected chain of segments. The record does not say which is the usual start.

The trail

Length70.9 miles
Trail class3, developed
Typeland trail
Surfacenative material
Typical grade12-20 percent
Typical tread width18-24 inches
Motor vehiclesClosed to all motorized use year-round
AccessibilityNot evaluated
Trail numbersTR440-G
ForestNational Forests in North Carolina (unit 0811)
StatesNorth Carolina
Detail publishedmanagement level, with uses

Values are the set across all segments. Class 1 is minimally developed and class 5 is fully developed. Grade and width are the forest's typical values, not measured extremes.

Allowed uses

HikingAllowed year-round
Horse and pack stockAllowed
Mountain bikingAllowed year-round

A use is listed when the Forest Service records it as managed, accepted or discouraged on any segment. Discouraged still means legal. Uses marked restricted are left out. Where the forest publishes a Motor Vehicle Use Map, that map governs motorized use.

Wilderness

Inside a designated wilderness, bicycles and motor vehicles are prohibited by law regardless of the trail record, and permits or group limits may apply.

Trailheads

The Forest Service recreation layer records no trailhead within a third of a mile of this trail's line. Many trails start from a road pullout or another trail with no trailhead record. The forest's recreation pages list the trailheads it does publish.

Distance is from the point to the nearest part of the trail line. Season text is what the forest wrote and is often a season name rather than a date. The recreation page link goes to the Forest Service site, which may redirect to the forest's recreation index.

Camping nearby

Campsite Atlas cards carry site counts and booking links from Recreation.gov. Forest Service cards come from the recreation layer and link the agency page.

Explore

Reference

Questions people ask

How long is the Mst - Grandfather RD Trail?

70.9 miles, the sum of the 1 segment the Forest Service records under this name in National Forests in North Carolina.

Source: Forest Service trail layer

What is allowed on the Mst - Grandfather RD Trail?

hiking, horse and pack stock and mountain biking. The trail is closed to motor vehicles year-round.

Source: Forest Service trail layer

Where does the Mst - Grandfather RD Trail start?

The line begins at 35.7722, -82.1669 and ends at 36.0810, -81.8298. No Forest Service trailhead is recorded within a third of a mile of it. The record does not say which end is the usual start.

Source: Forest Service trail layer

Is the Mst - Grandfather RD Trail in a wilderness area?

Yes. It enters Linville Gorge Wilderness. Wilderness rules ban bicycles and motor vehicles and often limit group size.

Source: Linville Gorge Wilderness Wilderness

Where can I camp near the Mst - Grandfather RD Trail?

Mortimer Campground (0.9 mi), Mortimer Campground (0.9 mi) and Carolina Hemlocks Recreation Area (2.9 mi) are within five miles of the trail. Site counts and booking links are on Campsite Atlas.

Source: Campsite Atlas

How developed is the Mst - Grandfather RD Trail?

Trail class 3, which the Forest Service describes as developed. Class 1 is a minimal, unimproved route and class 5 is fully developed, often paved.

Source: Forest Service trail layer

How steep and how wide is the Mst - Grandfather RD Trail?

The typical grade is 12-20 percent. The typical tread is 18-24 inches wide.

Source: Forest Service trail layer

Who manages the Mst - Grandfather RD Trail?

National Forests in North Carolina, Forest Service unit 0811. The trail is in North Carolina.

Source: National Forests in North Carolina official page

Source

This page is built from 1 segment named MST - GRANDFATHER RD in the Forest Service TrailNFS_Publish layer, administrative unit 0811. Wilderness overlap is tested against the National Wilderness Preservation System layer from Wilderness Connect. Trailheads and Forest Service campgrounds come from the Forest Service Recreation Opportunities layer. Data refreshed September 17, 2026. The methodology page explains how segments become trails.