Mill Shoals Trail
Mill Shoals Trail is a 2.5-mile trail in Chattahoochee-Oconee National Forests, Georgia. The Forest Service rates it trail class 3, developed. It is open to hiking.
Trail conditions, closures and hazards are not tracked here. The Chattahoochee-Oconee National Forests official page carries current alerts and closure orders.
Map
One end Other endLine simplified to about 100 metres. Basemap from the USGS National Map.
| One end | 34.7764° N, 84.0447° W · Directions ↗ |
| Other end | 34.7620° N, 84.0677° W · Directions ↗ |
The ends are the two ends of the longest connected chain of segments. The record does not say which is the usual start.
The trail
| Length | 2.5 miles, all of it evaluated accessible |
| Trail class | 3, developed |
| Type | land trail |
| Surface | native material |
| Typical grade | 12-20 percent |
| Typical tread width | 18-24 inches |
| Motor vehicles | Closed to all motorized use year-round |
| Accessibility | At least one segment meets Forest Service accessibility guidelines |
| Trail numbers | 89 |
| Forest | Chattahoochee-Oconee National Forests (unit 0803) |
| States | Georgia |
| Detail published | management level, with uses |
Values are the set across all segments. Class 1 is minimally developed and class 5 is fully developed. Grade and width are the forest's typical values, not measured extremes.
Weather by month
Allowed uses
| Hiking | Allowed year-round |
A use is listed when the Forest Service records it as managed, accepted or discouraged on any segment. Discouraged still means legal. Uses marked restricted are left out. Where the forest publishes a Motor Vehicle Use Map, that map governs motorized use.
Trailheads
The Forest Service recreation layer records no trailhead within a third of a mile of this trail's line. Many trails start from a road pullout or another trail with no trailhead record. The forest's recreation pages list the trailheads it does publish.
Trails nearby
Camping nearby
Campsite Atlas cards carry site counts and booking links from Recreation.gov. Forest Service cards come from the recreation layer and link the agency page.
Fire nearby
- PrescribedRx - Rymer Camp
32 mi from the trail midpoint · 381 acres
- PrescribedRx - Buck Branch
41 mi from the trail midpoint · 652 acres
Distance is to the reported incident point, not the fire edge. Closure orders are on the forest's official page.
Explore
Historic places nearby
Guidebooks for Georgia
We earn a small commission if you buy through these links. It does not change what we list.
Titles come from Open Library's catalog, matched by subject heading or by title.
Reference
Questions people ask
How long is the Mill Shoals Trail?
The Forest Service records 2.5 miles under this name in Chattahoochee-Oconee National Forests, the sum of 1 segment. All of it is evaluated as accessible.
Source: Forest Service trail layer
What is allowed on the Mill Shoals Trail?
Hiking is allowed. The trail is closed to motor vehicles year-round.
Source: Forest Service trail layer
Where does the Mill Shoals Trail start?
The line begins at 34.7764° N, 84.0447° W and ends at 34.7620° N, 84.0677° W. No Forest Service trailhead is recorded within a third of a mile of it. The record does not say which end is the usual start.
Source: Forest Service trail layer
Is the Mill Shoals Trail in a wilderness area?
No. The trail line does not cross any polygon in the National Wilderness Preservation System layer.
Source: Wilderness Connect
Where can I camp near the Mill Shoals Trail?
Cooper Creek Campground (0.4 mi), Mulky Campground (0.4 mi) and Deep Hole Recreation Area (4.4 mi) are within five miles of the trail. The camping section lists all 4 with site counts and booking links.
Source: Campsite Atlas
How developed is the Mill Shoals Trail?
Trail class 3, which the Forest Service describes as developed. Class 1 is a minimal, unimproved route and class 5 is fully developed, often paved.
Source: Forest Service trail layer
How steep and how wide is the Mill Shoals Trail?
The typical grade is 12-20 percent. The typical tread is 18-24 inches wide.
Source: Forest Service trail layer
Is the Mill Shoals Trail accessible?
The Forest Service has evaluated 2.5 miles of this trail as meeting its accessibility guidelines. The surface is native material.
Source: Forest Service trail layer
Who manages the Mill Shoals Trail?
Chattahoochee-Oconee National Forests, Forest Service unit 0803. The trail is in Georgia.
Is there a fire near the Mill Shoals Trail?
The interagency feed shows 2 active incidents within 50 miles of the trail midpoint as of 2026-11-01, the nearest Rx - Rymer Camp at 32 miles. Check the forest's closure orders before you go.
Source: Fire nearby
Source
This page is built from 1 segment named Mill Shoals Trail in the Forest Service TrailNFS_Publish layer, administrative unit 0803. Wilderness overlap is tested against the National Wilderness Preservation System layer from Wilderness Connect. Trailheads and Forest Service campgrounds come from the Forest Service Recreation Opportunities layer. Data refreshed November 1, 2026. The methodology page explains how segments become trails.