Cleveland National Forest · California · Trail 6W03

Holy Jim

Holy Jim Trail is a 5.3 miles trail in Cleveland National Forest, California. The Forest Service rates it trail class 4, highly developed. It is open to hiking, horse and pack stock and mountain biking.

Trail conditions, closures and hazards are not tracked here. The Cleveland National Forest official page carries current alerts and closure orders.

Map

One end Other endLine simplified to about 100 metres. Basemap from the USGS National Map.

One end33.6828, -117.5163 · Directions ↗
Other end33.7104, -117.5192 · Directions ↗

The ends are the two ends of the longest connected chain of segments. The record does not say which is the usual start. The trail is recorded as 2 segments.

The trail

Length5.3 miles
Trail class4, highly developed
Typeland trail
Surfacenative material
Typical grade10-12 percent
Typical tread width18-24 inches
Motor vehiclesClosed to all motorized use year-round
AccessibilityNot evaluated
Trail numbers6W03
ForestCleveland National Forest (unit 0502)
StatesCalifornia
Detail publishedmanagement level, with uses

Values are the set across all segments. Class 1 is minimally developed and class 5 is fully developed. Grade and width are the forest's typical values, not measured extremes.

Allowed uses

HikingAllowed year-round
Horse and pack stockAllowed year-round
Mountain bikingAllowed year-round

A use is listed when the Forest Service records it as managed, accepted or discouraged on any segment. Discouraged still means legal. Uses marked restricted are left out. Where the forest publishes a Motor Vehicle Use Map, that map governs motorized use.

Trailheads

The Forest Service recreation layer records no trailhead within a third of a mile of this trail's line. Many trails start from a road pullout or another trail with no trailhead record. The forest's recreation pages list the trailheads it does publish.

Distance is from the point to the nearest part of the trail line. Season text is what the forest wrote and is often a season name rather than a date. The recreation page link goes to the Forest Service site, which may redirect to the forest's recreation index.

Camping nearby

Campsite Atlas cards carry site counts and booking links from Recreation.gov. Forest Service cards come from the recreation layer and link the agency page.

Explore

Reference

Questions people ask

How long is the Holy Jim Trail?

5.3 miles, the sum of the 2 segments the Forest Service records under this name in Cleveland National Forest.

Source: Forest Service trail layer

What is allowed on the Holy Jim Trail?

hiking, horse and pack stock and mountain biking. The trail is closed to motor vehicles year-round.

Source: Forest Service trail layer

Where does the Holy Jim Trail start?

The line begins at 33.6828, -117.5163 and ends at 33.7104, -117.5192. No Forest Service trailhead is recorded within a third of a mile of it. The record does not say which end is the usual start.

Source: Forest Service trail layer

Is the Holy Jim Trail in a wilderness area?

No. The trail line does not cross any polygon in the National Wilderness Preservation System layer.

Source: Wilderness Connect

Where can I camp near the Holy Jim Trail?

Falcon Group (3.7 mi) and Blue Jay Campground (4.3 mi) are within five miles of the trail. Site counts and booking links are on Campsite Atlas.

Source: Campsite Atlas

How developed is the Holy Jim Trail?

Trail class 4, which the Forest Service describes as highly developed. Class 1 is a minimal, unimproved route and class 5 is fully developed, often paved.

Source: Forest Service trail layer

How steep and how wide is the Holy Jim Trail?

The typical grade is 10-12 percent. The typical tread is 18-24 inches wide.

Source: Forest Service trail layer

Who manages the Holy Jim Trail?

Cleveland National Forest, Forest Service unit 0502. The trail is in California.

Source: Cleveland National Forest official page

Source

This page is built from 2 segments named HOLY JIM in the Forest Service TrailNFS_Publish layer, administrative unit 0502. Wilderness overlap is tested against the National Wilderness Preservation System layer from Wilderness Connect. Trailheads and Forest Service campgrounds come from the Forest Service Recreation Opportunities layer. Data refreshed September 17, 2026. The methodology page explains how segments become trails.