Halliday
Halliday Trail is a 4.2-mile trail in Colville National Forest, Washington. The Forest Service rates it trail class 3, developed. It is open to hiking, horse and pack stock and mountain biking.
Trail conditions, closures and hazards are not tracked here. The Colville National Forest official page carries current alerts and closure orders.
Map
One end Other endLine simplified to about 100 metres. Basemap from the USGS National Map.
| One end | 48.9244° N, 117.3128° W · Directions ↗ |
| Other end | 48.9028° N, 117.2719° W · Directions ↗ |
The ends are the two ends of the longest connected chain of segments. The record does not say which is the usual start. The trail is recorded as 2 segments.
The trail
| Length | 4.2 miles |
| Trail class | 3, developed |
| Type | land trail |
| Surface | native material |
| Typical grade | 12-20 percent |
| Typical tread width | 18-24 inches |
| Motor vehicles | Closed to all motorized use year-round |
| Accessibility | Evaluated and does not meet accessibility guidelines |
| National designation | National Scenic or Historic Trail |
| Trail numbers | 522 |
| Forest | Colville National Forest (unit 0621) |
| States | Washington |
| Detail published | management level, with uses |
Values are the set across all segments. Class 1 is minimally developed and class 5 is fully developed. Grade and width are the forest's typical values, not measured extremes.
Weather by month
Allowed uses
| Hiking | Allowed year-round |
| Horse and pack stock | Allowed year-round |
| Mountain biking | Allowed year-round |
A use is listed when the Forest Service records it as managed, accepted or discouraged on any segment. Discouraged still means legal. Uses marked restricted are left out. Where the forest publishes a Motor Vehicle Use Map, that map governs motorized use.
Trailheads
The Forest Service recreation layer records no trailhead within a third of a mile of this trail's line. Many trails start from a road pullout or another trail with no trailhead record. The forest's recreation pages list the trailheads it does publish.
Trails nearby
Camping nearby
Campsite Atlas cards carry site counts and booking links from Recreation.gov. Forest Service cards come from the recreation layer and link the agency page.
Fire nearby
- PrescribedSl Rx - Limestone Timber Sale
7 mi from the trail midpoint · 38 acres
- Prescribed3R Rx - Silver Gna
12 mi from the trail midpoint · 100 acres
- PrescribedSl Rx - Lost Creek Stewardship
20 mi from the trail midpoint · 24 acres
- PrescribedNp Rx - High Noon Stewardship
22 mi from the trail midpoint · 345 acres
Distance is to the reported incident point, not the fire edge. Closure orders are on the forest's official page.
Explore
Historic places nearby
Guidebooks for Washington
We earn a small commission if you buy through these links. It does not change what we list.
Titles come from Open Library's catalog, matched by subject heading or by title.
Reference
Questions people ask
How long is the Halliday Trail?
The Forest Service records 4.2 miles under this name in Colville National Forest, the sum of 2 segments.
Source: Forest Service trail layer
What is allowed on the Halliday Trail?
Hiking, horse and pack stock and mountain biking are allowed. The trail is closed to motor vehicles year-round.
Source: Forest Service trail layer
Where does the Halliday Trail start?
The line begins at 48.9244° N, 117.3128° W and ends at 48.9028° N, 117.2719° W. No Forest Service trailhead is recorded within a third of a mile of it. The record does not say which end is the usual start.
Source: Forest Service trail layer
Is the Halliday Trail in a wilderness area?
No. The trail line does not cross any polygon in the National Wilderness Preservation System layer.
Source: Wilderness Connect
Where can I camp near the Halliday Trail?
East Sullivan (2.9 mi), West Sullivan (3 mi) and Mill Pond Campground (3.5 mi) are within five miles of the trail. The camping section lists all 5 with site counts and booking links.
Source: Campsite Atlas
How developed is the Halliday Trail?
Trail class 3, which the Forest Service describes as developed. Class 1 is a minimal, unimproved route and class 5 is fully developed, often paved.
Source: Forest Service trail layer
How steep and how wide is the Halliday Trail?
The typical grade is 12-20 percent. The typical tread is 18-24 inches wide.
Source: Forest Service trail layer
Is the Halliday Trail accessible?
No. The Forest Service evaluated it and found it does not meet its accessibility guidelines.
Source: Forest Service trail layer
Is the Halliday Trail a national trail?
Yes. The record marks it as a National Scenic or Historic Trail.
Source: Forest Service trail layer
Who manages the Halliday Trail?
Colville National Forest, Forest Service unit 0621. The trail is in Washington.
Is there a fire near the Halliday Trail?
The interagency feed shows 4 active incidents within 50 miles of the trail midpoint as of 2026-11-01, the nearest Sl Rx - Limestone Timber Sale at 7 miles. Check the forest's closure orders before you go.
Source: Fire nearby
Source
This page is built from 2 segments named Halliday in the Forest Service TrailNFS_Publish layer, administrative unit 0621. Wilderness overlap is tested against the National Wilderness Preservation System layer from Wilderness Connect. Trailheads and Forest Service campgrounds come from the Forest Service Recreation Opportunities layer. Data refreshed November 1, 2026. The methodology page explains how segments become trails.