Falls of Hills Creek Trail
Falls of Hills Creek Trail is a 0.5 miles trail in Monongahela National Forest, West Virginia. The Forest Service rates it trail class 4, highly developed. It is open to hiking and horse and pack stock.
Trail conditions, closures and hazards are not tracked here. The Monongahela National Forest official page carries current alerts and closure orders.
Map
One end Other endLine simplified to about 100 metres. Basemap from the USGS National Map.
| One end | 38.1768, -80.3380 · Directions ↗ |
| Other end | 38.1749, -80.3354 · Directions ↗ |
The ends are the two ends of the longest connected chain of segments. The record does not say which is the usual start. The trail is recorded as 2 segments.
The trail
| Length | 0.5 miles, of which 0.1 miles evaluated accessible |
| Trail class | 4, highly developed |
| Type | land trail |
| Surface | asphalt, other (paved) |
| Typical grade | 10-12 percent, 0-5 percent |
| Typical tread width | 36-48 inches, 48-60 inches |
| Minimum width | over 42 inches |
| Motor vehicles | Closed to all motorized use year-round |
| Accessibility | At least one segment meets Forest Service accessibility guidelines |
| Special management area | IRA - INVENTORIED ROADLESS AREA |
| Trail numbers | 249 |
| Forest | Monongahela National Forest (unit 0921) |
| States | West Virginia |
| Detail published | management level, with uses |
Values are the set across all segments. Class 1 is minimally developed and class 5 is fully developed. Grade and width are the forest's typical values, not measured extremes.
Allowed uses
| Hiking | Allowed year-round |
| Horse and pack stock | Allowed |
A use is listed when the Forest Service records it as managed, accepted or discouraged on any segment. Discouraged still means legal. Uses marked restricted are left out. Where the forest publishes a Motor Vehicle Use Map, that map governs motorized use.
Trailheads
The Forest Service recreation layer records no trailhead within a third of a mile of this trail's line. Many trails start from a road pullout or another trail with no trailhead record. The forest's recreation pages list the trailheads it does publish.
Distance is from the point to the nearest part of the trail line. Season text is what the forest wrote and is often a season name rather than a date. The recreation page link goes to the Forest Service site, which may redirect to the forest's recreation index.
Camping nearby
Campsite Atlas cards carry site counts and booking links from Recreation.gov. Forest Service cards come from the recreation layer and link the agency page.
Explore
Reference
Questions people ask
How long is the Falls of Hills Creek Trail?
0.5 miles, the sum of the 2 segments the Forest Service records under this name in Monongahela National Forest. 0.1 miles of that are evaluated as accessible.
Source: Forest Service trail layer
What is allowed on the Falls of Hills Creek Trail?
hiking and horse and pack stock. The trail is closed to motor vehicles year-round.
Source: Forest Service trail layer
Where does the Falls of Hills Creek Trail start?
The line begins at 38.1768, -80.3380 and ends at 38.1749, -80.3354. No Forest Service trailhead is recorded within a third of a mile of it. The record does not say which end is the usual start.
Source: Forest Service trail layer
Is the Falls of Hills Creek Trail in a wilderness area?
No. The trail line does not cross any polygon in the National Wilderness Preservation System layer.
Source: Wilderness Connect
Where can I camp near the Falls of Hills Creek Trail?
Cranberry Glades Botanical Area (4.3 mi) is within five miles of the trail. Site counts and booking links are on Campsite Atlas.
Source: Campsite Atlas
How developed is the Falls of Hills Creek Trail?
Trail class 4, which the Forest Service describes as highly developed. Class 1 is a minimal, unimproved route and class 5 is fully developed, often paved.
Source: Forest Service trail layer
How steep and how wide is the Falls of Hills Creek Trail?
The typical grade is 10-12 percent on most segments and 0-5 percent on others. The typical tread is 36-48 inches wide.
Source: Forest Service trail layer
Is the Falls of Hills Creek Trail accessible?
The Forest Service has evaluated 0.1 miles of this trail as meeting its accessibility guidelines. The surface is asphalt and other.
Source: Forest Service trail layer
Who manages the Falls of Hills Creek Trail?
Monongahela National Forest, Forest Service unit 0921. The trail is in West Virginia.
Source
This page is built from 2 segments named FALLS OF HILLS CREEK TRAIL in the Forest Service TrailNFS_Publish layer, administrative unit 0921. Wilderness overlap is tested against the National Wilderness Preservation System layer from Wilderness Connect. Trailheads and Forest Service campgrounds come from the Forest Service Recreation Opportunities layer. Data refreshed September 17, 2026. The methodology page explains how segments become trails.