Daniels Canyon
Daniels Canyon Trail is a 6-mile trail in Fishlake National Forest, Utah. The Forest Service rates it trail class 4, highly developed. It is open to hiking, horse and pack stock, mountain biking and e-bikes.
Trail conditions, closures and hazards are not tracked here. The Fishlake National Forest official page carries current alerts and closure orders.
Map
One end Other endLine simplified to about 100 metres. Basemap from the USGS National Map.
| One end | 38.6068° N, 111.7758° W · Directions ↗ |
| Other end | 38.6684° N, 111.7269° W · Directions ↗ |
The ends are the two ends of the longest connected chain of segments. The record does not say which is the usual start.
The trail
| Length | 6 miles, all of it evaluated accessible |
| Trail class | 4, highly developed |
| Type | land trail |
| Surface | native material (soft) |
| Typical grade | 12-20 percent |
| Typical tread width | 36-48 inches |
| Motor vehicles | Closed to all motorized use year-round |
| Accessibility | At least one segment meets Forest Service accessibility guidelines |
| Trail numbers | 4129 |
| Forest | Fishlake National Forest (unit 0408) |
| States | Utah |
| Detail published | management level, with uses |
Values are the set across all segments. Class 1 is minimally developed and class 5 is fully developed. Grade and width are the forest's typical values, not measured extremes.
Weather by month
Allowed uses
| Hiking | Allowed year-round |
| Horse and pack stock | Allowed |
| Mountain biking | Allowed year-round |
| E-bikes | Allowed year-round |
A use is listed when the Forest Service records it as managed, accepted or discouraged on any segment. Discouraged still means legal. Uses marked restricted are left out. Where the forest publishes a Motor Vehicle Use Map, that map governs motorized use.
Trailheads
The Forest Service recreation layer records no trailhead within a third of a mile of this trail's line. Many trails start from a road pullout or another trail with no trailhead record. The forest's recreation pages list the trailheads it does publish.
Trails nearby
Camping nearby
Campsite Atlas cards carry site counts and booking links from Recreation.gov. Forest Service cards come from the recreation layer and link the agency page.
Fire nearby
- Prescribed12 Mile Rx
30 mi from the trail midpoint · 350 acres
- PrescribedEscalante Municipal Piles Rx
48 mi from the trail midpoint
Distance is to the reported incident point, not the fire edge. Closure orders are on the forest's official page.
Explore
Guidebooks for Utah
We earn a small commission if you buy through these links. It does not change what we list.
Titles come from Open Library's catalog, matched by subject heading or by title.
Reference
Questions people ask
How long is the Daniels Canyon Trail?
The Forest Service records 6 miles under this name in Fishlake National Forest, the sum of 1 segment. All of it is evaluated as accessible.
Source: Forest Service trail layer
What is allowed on the Daniels Canyon Trail?
Hiking, horse and pack stock, mountain biking and e-bikes are allowed. The trail is closed to motor vehicles year-round.
Source: Forest Service trail layer
Where does the Daniels Canyon Trail start?
The line begins at 38.6068° N, 111.7758° W and ends at 38.6684° N, 111.7269° W. No Forest Service trailhead is recorded within a third of a mile of it. The record does not say which end is the usual start.
Source: Forest Service trail layer
Is the Daniels Canyon Trail in a wilderness area?
No. The trail line does not cross any polygon in the National Wilderness Preservation System layer.
Source: Wilderness Connect
Where can I camp near the Daniels Canyon Trail?
Frying Pan (3.9 mi), Tasha Equestrian (4.4 mi) and Mackinaw (4.8 mi) are within five miles of the trail. The camping section lists all 6 with site counts and booking links.
Source: Campsite Atlas
How developed is the Daniels Canyon Trail?
Trail class 4, which the Forest Service describes as highly developed. Class 1 is a minimal, unimproved route and class 5 is fully developed, often paved.
Source: Forest Service trail layer
How steep and how wide is the Daniels Canyon Trail?
The typical grade is 12-20 percent. The typical tread is 36-48 inches wide.
Source: Forest Service trail layer
Is the Daniels Canyon Trail accessible?
The Forest Service has evaluated 6 miles of this trail as meeting its accessibility guidelines. The surface is native material.
Source: Forest Service trail layer
Who manages the Daniels Canyon Trail?
Fishlake National Forest, Forest Service unit 0408. The trail is in Utah.
Is there a fire near the Daniels Canyon Trail?
The interagency feed shows 2 active incidents within 50 miles of the trail midpoint as of 2026-11-01, the nearest 12 Mile Rx at 30 miles. Check the forest's closure orders before you go.
Source: Fire nearby
Source
This page is built from 1 segment named Daniels Canyon in the Forest Service TrailNFS_Publish layer, administrative unit 0408. Wilderness overlap is tested against the National Wilderness Preservation System layer from Wilderness Connect. Trailheads and Forest Service campgrounds come from the Forest Service Recreation Opportunities layer. Data refreshed November 1, 2026. The methodology page explains how segments become trails.