Bear Mountain
Bear Mountain Trail is a 4.6 miles trail in Pike and San Isabel National Forests, Colorado. The Forest Service rates it trail class 2, moderately developed. It is open to hiking, horse and pack stock, mountain biking, motorcycle and e-bikes.
Trail conditions, closures and hazards are not tracked here. The Pike and San Isabel National Forests official page carries current alerts and closure orders.
Map
One end Other endLine simplified to about 100 metres. Basemap from the USGS National Map.
| One end | 39.3485, -105.1222 · Directions ↗ |
| Other end | 39.3676, -105.1407 · Directions ↗ |
The ends are the two ends of the longest connected chain of segments. The record does not say which is the usual start. The trail is recorded as 2 segments.
The trail
| Length | 4.6 miles |
| Trail class | 2, moderately developed |
| Type | land trail |
| Surface | native material |
| Typical grade | 12-20 percent |
| Typical tread width | 18-24 inches |
| Motor vehicles | Open to at least one motorized use |
| Accessibility | Not evaluated |
| Trail numbers | 0693 |
| Forest | Pike and San Isabel National Forests (unit 0212) |
| States | Colorado |
| Detail published | management level, with uses |
Values are the set across all segments. Class 1 is minimally developed and class 5 is fully developed. Grade and width are the forest's typical values, not measured extremes.
Allowed uses
| Hiking | Allowed 06/01 to 03/31 (month/day) |
| Horse and pack stock | Allowed 06/01 to 03/31 (month/day) |
| Mountain biking | Allowed 06/01 to 03/31 (month/day) |
| Motorcycle | Allowed 06/01 to 03/31 (month/day) |
| E-bikes | Allowed 06/01 to 03/31 (month/day) |
A use is listed when the Forest Service records it as managed, accepted or discouraged on any segment. Discouraged still means legal. Uses marked restricted are left out. Where the forest publishes a Motor Vehicle Use Map, that map governs motorized use.
Trailheads
The Forest Service recreation layer records no trailhead within a third of a mile of this trail's line. Many trails start from a road pullout or another trail with no trailhead record. The forest's recreation pages list the trailheads it does publish.
Distance is from the point to the nearest part of the trail line. Season text is what the forest wrote and is often a season name rather than a date. The recreation page link goes to the Forest Service site, which may redirect to the forest's recreation index.
Camping nearby
Campsite Atlas cards carry site counts and booking links from Recreation.gov. Forest Service cards come from the recreation layer and link the agency page.
Explore
Reference
Questions people ask
How long is the Bear Mountain Trail?
4.6 miles, the sum of the 2 segments the Forest Service records under this name in Pike and San Isabel National Forests.
Source: Forest Service trail layer
What is allowed on the Bear Mountain Trail?
hiking, horse and pack stock, mountain biking, motorcycle and e-bikes. The trail is open to at least one motorized use. Some uses are seasonal. The allowed uses section lists the dates.
Source: Forest Service trail layer
Where does the Bear Mountain Trail start?
The line begins at 39.3485, -105.1222 and ends at 39.3676, -105.1407. No Forest Service trailhead is recorded within a third of a mile of it. The record does not say which end is the usual start.
Source: Forest Service trail layer
Is the Bear Mountain Trail in a wilderness area?
No. The trail line does not cross any polygon in the National Wilderness Preservation System layer.
Source: Wilderness Connect
Where can I camp near the Bear Mountain Trail?
Indian Creek Equestrian Campground (1.5 mi), Rampart Range Recreation Area Designated Dispersed Camping (1.8 mi) and Flat Rocks Campground (2.2 mi) are within five miles of the trail. Site counts and booking links are on Campsite Atlas.
How developed is the Bear Mountain Trail?
Trail class 2, which the Forest Service describes as moderately developed. Class 1 is a minimal, unimproved route and class 5 is fully developed, often paved.
Source: Forest Service trail layer
How steep and how wide is the Bear Mountain Trail?
The typical grade is 12-20 percent. The typical tread is 18-24 inches wide.
Source: Forest Service trail layer
Who manages the Bear Mountain Trail?
Pike and San Isabel National Forests, Forest Service unit 0212. The trail is in Colorado.
Source
This page is built from 2 segments named BEAR MOUNTAIN in the Forest Service TrailNFS_Publish layer, administrative unit 0212. Wilderness overlap is tested against the National Wilderness Preservation System layer from Wilderness Connect. Trailheads and Forest Service campgrounds come from the Forest Service Recreation Opportunities layer. Data refreshed September 17, 2026. The methodology page explains how segments become trails.